German Automotive Enthusiast

This was posted on Improved Touring at 04-09-2012 09:18 AM

Selling the car since I just purchased an SPU car and I have no more room in the garage. The car has an SCCA logbook and the annual is good through June 2012. The car comes with a set of RA1′s(unshaved) and Hoosiers that still have excellent life in them.

The motor was built for IT racing by Robello. The car runs great. It was used for my Novice races at Daytona in August.

Car is located in South Florida. Cotact me at riderosa@crossmatch.net for more information

I will also consider a partial or full trade

To see the original post at Improved Touring follow the link below
http://www.improvedtouring.com/forums/showthread.php?t=30331

This was posted on Improved Touring at 04-06-2012 01:52 AM

Used this strong mr2 to get started in club racing, bought the swift and hoped my dad would run this mr2 with me, but he’s changed his mind. Selling the mr2.

Built by my uncle in Florida and raced at Sebring and Daytona. I used it through competition school and a few races. Also autocrossed it.

http://cgi.ebay.com/ebaymotors/?cmd=…%3AMESELX%3AIT

some specs:

full welded cage
fresh tokiko adjustable front / rear shocks
dual disc racing clutch
strut bar
3 sets of wheels / tires (hoosier slicks, kumhos, all couple years old)
new aluminum kirkey seat
current G Force harnesses
fire extinguisher
kill switch
wink mirror
oil cooler
removable steering wheel
k&n intake
custom exhaust
AMB transponder (hardwired)
tach, oil, water gauges
fan switch / separate dash, oil cooler, fan switches
custom air dam (minor kinks / cuts in air dam from loading on trailer ramps)
active log book
lots of new tune-up items recently installed
shop manual
binder with receipts from my uncle (if I can locate it)

I’m sure there’s LOTS more but this list is off the top of my head.

Feel free to ask any questions; I’ll try to answer the ones I know.

Any spares I can find in the garage will go with the car.

Reserve is at $3000.

Holds a lot of sentimental value since Uncle Joe passed away from cancer before he could see me race in it, but upcoming wedding is forcing me to part with some extra toys.

To see the original post at Improved Touring follow the link below
http://www.improvedtouring.com/forums/showthread.php?t=30323

This was posted on Improved Touring at 04-03-2012 10:05 PM

Yeah,take it out , too much going on to mess with it.

To see the original post at Improved Touring follow the link below
http://www.improvedtouring.com/forums/showthread.php?t=30315

This was posted on Improved Touring at 03-14-2012 06:44 AM

ITS Mazda RX-7 1988.
K&N cone filter, RB headers, Howe radiator, OMP racing seat, fully adjustable suspension: Tokico and Eibach. Bolt-in full cage. Big brakes. Mounted drys and wets. RE Motorola P2000 radios. Factory shop manual. Needs current belts. Some consumables go with car. Regional IT, Pro-IT and National STU. If you want to have fun for cheap, this is the car. $3500. Bill Umstead 914.282.4355 wlu49@aol.com

To see the original post at Improved Touring follow the link below
http://www.improvedtouring.com/forums/showthread.php?t=30253

This was posted on Improved Touring at 03-01-2012 09:14 PM

2008 Mazdaspeed 3 STU for sale

Fully built to the current STU rules, very fast,very well sorted.

Fresh Reynolds MPS 3 engine with Dynotronics Cams and tuning. 335 whp with the 39mm restrictor. Electronic Adjustable boost set up.Front mounted intercooler.Very trick Ron Davis radiator,Nascar type oil and PS coolers.Blueprinted turbo on a Steedspeed custom manifold, with external 40 mm wastegate Spare engine avaliable also.

MRE built gearbox with Cusco. REMed gears and shafts. MRE built axels, with motorsports CVs.Spare gearbox avaliable

BC remote two way adjustables
MRE cockpit adjustable rear swaybar
Powerbrake 4 piston fronts on 331X32
AIM Dash and data with GPS and beacon
Grand Am style tig welded cage
Carbon hood
Carbon deck lid
3 sets K1 wheels
tons of spares
full set us sheets and dyno logs

Fresh and ready to race right now. Just add a driver!

This is a no holds bared full tilt build. Likely the fastest mazdaspeed 3 race car in the US built to the STU rules.

For more information please contact;

sales@dynotronicstuning.com
or 678-488-1011

To see the original post at Improved Touring follow the link below
http://www.improvedtouring.com/forums/showthread.php?t=30210

This was posted on Improved Touring at 02-29-2012 03:38 PM

Im moving to a new class with a new racecar so I am reluctantly selling my 2002. This car has been very good to me and no expense was spared in the building and maintaining of this car. Built to the extent of IT rules. I have a full description of the car and all suspension, brakes, engine, driveline etc if interested. Its just really long.

The car is very fast and very reliable. It is also adaptable to a wide variety of classes. The car has proven to be able to run at the front in the Northeast. The car is well sorted, very neutral, predictable and instills confidence the faster you go. Easy to work on quickly and very clean. I have a complete history of the car while I have owned it and a log of race weekends, results, set up info, etc. Also log books going back to 1994 from the original unibody. The car will not disappoint in person and is available to see and hear on Long Island, New York. I have many many more pictures and info I can email if interested. Thanks for looking.
regards
Cory

To see the original post at Improved Touring follow the link below
http://www.improvedtouring.com/forums/showthread.php?t=30207

This was posted on Improved Touring at 02-16-2012 03:29 PM

The race car comes with a second Kirkey racing seat for custom fit feel, 1 set of one heat cycle and 3 sets of two or three heat cycle (if wanted) Hoosier race tires, 2 sets of wheels and a spare After not racing for 8 years I bought this car and won in my first race weekend out. It consistently runs in the top 5. I have all log books and annual tech from SCCA and WHRRI in 2010 and 2011. Car was built and raced in Florida until I brought it up here for last years season.

It is at the frame shop having all minor tweaks done and being repainted.

$4,000

Email Kennard15@gmail or call 269-903-1113 if interested or if you have any questions

To see the original post at Improved Touring follow the link below
http://www.improvedtouring.com/forums/showthread.php?t=30167

This was posted on Improved Touring at 02-07-2012 09:20 PM

1987 Mazda RX-7 with current NASA and EMRA log books. Car is very clean and never wrecked. The car is competitive with room for improvement and is easily converted to a variety of different racing classes. It is currently set up for ITS in SCCA. This car is neutral, dependable, easy and fun to drive.Many spares are included with the car including doors, glass, control arms, rear subframe, sway bars, etc. The car was built on a lighter SE unibody with no sunroof. suspension and brake components came from a GXL with the big 4 piston front calipers, 2 piston rears, and the 5 lug hubs, as well as the other GXL upgrades. Has one set of Hoosier rain tires on 15" Mazda wheels, one set of dry hankook tires on 15×7 O.Z. mesh wheels, and one set of stock 16" turbo wheels.Some Specifics about the car.. Front Suspension:AWR shock tubes and hardware,Koni race single adjustable inserts,ground control camber plates,racing beat sway bar,adjustable end links,Eibach springs 425.Rear Suspension: AWR shock tops and hardware,Koni race single adjustable shocks,eibach springs 375,toe steer eliminator bushings,rear camber/caster adjusters.Full polyurethane bushings front and rear. Engine:AWR Aluminum radiator with electric fan,Fluidyne oil cooler with 10AN lines,Mazda Competition pulleys,NEW Racing Beat header with custom 2 1/2" exhaust and dynomax ultraflow SS muffler.Also includes, racing beat exhaust for Limerock. Never had a db issue with this on the car.IT motor built by Cams in NY.Oil injection system delete Driveline: Falcon race clutch and pressure plate,NEW clutch slave and SS braided line,3rd gear synchro is a little weak but I have used the car for a year in the same shape and it hasnt gotten any worse.NEW 4.33 Ring and Pinion with LSD all new bearings, crush collar etcNEW Rear Mazda Competition differential mounts. Interior: Full custom Roll Cage with Nascar Door Bars,Momo Seat,OMP Steering wheel and spacer,Schroth Belts belts good thru 2012,Mesh Window net,Right Side Net,Autometer oil, water and Tach.Brakes:NEW Front calipers,recent Hawk blue Pads, F and Rsteel braided brake lines,Mazda Competition Brake Ducts and Backing plates.
Any questions or for pictures please email. Im sure there are many more things I have left out. I have owned this car for about 10 years and decided it was time for a change. The car is available to see, drive and hear in LI, NY.Thanks

canzone523@gmail.com

To see the original post at Improved Touring follow the link below
http://www.improvedtouring.com/forums/showthread.php?t=30145

This was posted on Improved Touring at 02-07-2012 08:39 PM

Found it on Ebay. Kind of rough, might go cheap, original rear drum brakes. Texas
http://cgi.ebay.com/ebaymotors/Honda…ht_1095wt_1165

To see the original post at Improved Touring follow the link below
http://www.improvedtouring.com/forums/showthread.php?t=30144

This was posted on Improved Touring at 02-01-2012 10:22 PM

Saw on Ebay Expires 2/3 Lotsa motor work

http://cgi.ebay.com/ebaymotors/88-ma…#ht_500wt_1182

To see the original post at Improved Touring follow the link below
http://www.improvedtouring.com/forums/showthread.php?t=30121